Description
BMM Weston 850 Gas Flatwork Ironer
BMM Weston 850 Flatwork Ironers feature
Optimised bed design that ensures efficient operation over a wide range of conditions.
Pneumatic raising and automatic aligning of beds and rolls.
Integrated design of rolls and beds to ensure uniform heat transfer, thus optimizing clothing life.
Chest contours that eliminate gap pieces.
Minimum energy needs for drive system.
Simple, electronic, variable speed motor and drive system providing quiet, efficient, slip-free transition.
Analogue information system.
Inclined, ergonomically designed feed table for dafe, efficient hand or mechanical feeding.
Centralised moisture extraction system.
Thermally insulated.
Removable side covers for external servicing.
BMM Weston 850 Gas Flatwork Ironer
Technical Data
| Electric | Gas | Steam | Oil |
| Dimensions | ||||
|---|---|---|---|---|
| No. of rolls | 1 | 2 | ||
| Length – A | 2040 mm | 3140 mm | ||
| Width – B | 4160 mm | 4160 mm | ||
| Height – C | 1890 mm | 1890 mm | ||
| Technical data | ||||
| No. of rolls | 1 | 2 | ||
| Working width | 3000 mm | 3000 mm | ||
| Roll diameter | 850 mm | 850 mm | ||
| Speed range* | 0-15 m/min | 0-28 m/min | ||
| Air Pressure | 5.5-7 Bar | 5.5-7 Bar | ||
| Air Consumption (free air per lift cycle) | 24 litres | 48 litres | ||
| Electrical supply (standard) | 380-415 Volts / 3ph + N / 50Hz | |||
| Electrical consumption | 7.5 kW | 12 kW | ||
| Suction outlet (OD) | 200 mm | 200 mm x 2 | ||
| Gas Burner output | 180 kW | 180 kW x 2 | ||
| Heater exhaust outlet diameter | 150 mm | 250 mm x 2 | ||
| Gas Supply | 20 mm | 20 mm x 2 | ||
| Air inlet NB | 10 mm | 10 mm | ||
| Export Case Dimensions | ||||
| 1 Roll | 1 case | 4300x1885x1705 mm | ||
| 2 Roll | 1 case | 4300x1835x1705 mm | ||
| 1 case | 4300x1390x1705 mm | |||
| 3 Roll | 1 case | 4300x1835x1705 mm | ||
| 1 case | 4300x1200x1705 mm | |||
| 1 case | 4300x1390x1705 mm | |||
| * Maximum operating speed dependent on work type and moisture retention rate | ||||
Available Accessories
Optional extras include
- Integral Fast Feed aid.
- Feed through assembly.
- Hoods and walkways.
- Handrails and interconnected ladder.
- Take-off table assembly.
- Digital information system.
- Steam trap monitoring.
- High temperature clothing.
- Feeder/Folder, plugs and sockets.
- Special wiring to stop ironer from folder.
Brochure
Brochure
Installation Sheet
Installation Sheet
